Insights
Notes from the shop floor written for the people who specify parts: procurement, design engineers, and product teams scoping a build. Forming, welding, finishing, tolerances — capabilities, trade-offs, and the numbers that drive a decision.
Procurement Reference
What a PPAP submission for a sheet metal part contains — the AIAG elements, submission levels 1–5, what a fabricator can realistically supply, resubmission triggers, and how it differs from FAI.
Nevatronix Sheet Metal 10 min read
Read article
Procurement Reference
An honest sheet metal vs casting comparison for engineers scoping a housing, bracket, or enclosure — tooling cost, design-change risk, geometry, lead time, and where each wins.
Nevatronix Sheet Metal 8 min read
Read article
Joining
A sheet metal shop's honest three-way take for procurement engineers — cosmetics, deposition speed, repeatability at volume, and when to spec the weld requirement, not the process.
Nevatronix Sheet Metal 8 min read
Read article
Procurement Reference
A bookmarkable reference to realistic sheet metal tolerances by feature — laser-cut, holes, bends, flatness, PEM hardware — what over-tolerancing costs, and when a part belongs on a mill.
Nevatronix Sheet Metal 10 min read
Read article
Process Selection
A press brake shop's honest comparison for procurement engineers — geometry, length, tolerance, setup time, and the quantities where roll forming starts to win.
Nevatronix Sheet Metal 7 min read
Read article
Editorial
A short note on why we're launching this blog, who it's for, and what we will — and won't — be writing about.
Nevatronix Sheet Metal 1 min read
Read article
